PIR ModuleThe PIR Module works as a motion detector operating on a passive infrared (PIR) principle. A typical usage of the PIR Module can be a wireless motion detector located on a wall or ceiling. The module is equipped with an ultra-low-power digital sensor from Excelitas' the DigiPyro® family.


  • Digital PIR detector PYQ-1648-7053 (Excelitas)
  • Fully digital processing (signal analysis takes place in the sensor)
  • Four-element sensor type
  • Omnidirectional lens Carclo Diamond 37
  • Resolution of the internal A/D converter: 14-bit
  • Detection angle: 98° (horizontally and vertically)
  • Maximal detection range: 5 m
  • Power consumption: approx. 3 μA
  • Operating voltage range: 2.5 V to 3.6 V
  • Operating temperature range: -20 to 70 °C
  • Dimensions: 33 x 55 mm


Firmware Projects

Chapters in this document:
Edit this page

We will inspire you!

You will get regularly our Clownsletter with real projects from other Makers. Do not miss it!

By sign up you will know how even you can inspire others and get €100 discount coupon!