Tag Module The Tag Module makes it possible to connect up to six BigClow tags. There are two independent I²C buses (I2C0 and I2C1) - one on each side. This allows to connect two tags of the same I²C address to a single BigClown node. It also features pull-up resistors on SDA/SCL signals of I2C1 bus.

Some BigClown modules already have one or more extra 5-pin sockets allowing you to connect a BigClown tag. But sometimes the number of positions is not enough, the socket is not available, or you need to extend the I²C bus with an additional channel. And that's when the Tag Module can help.

Features

  • 6x 5-pin socket position for BigClown tag
  • 3x tag positions are connected to I2C0 (right side)
  • 3x tag positions are connected to I2C1 (left side)
  • Integrated pull-up resistors on SDA/SCL signals of I2C1 bus
  • Operating temperature range: -20 to 70 °C
  • Mechanical dimensions: 44 x 55 mm

Resources